在使用液壓升降平臺http://m.kkwl.net/之前，我們需要對液壓升降平臺架體結構做全面檢查，下面石家莊悅翔機械制造的有關專家給大家介紹一下液壓升降平臺使用之前應該檢查哪些部位。

1、檢查液壓升降平臺架體結構，應查看基礎及標準連接螺栓緊固情況，螺栓按規定設置雙螺帽或彈簧墊，各部位焊縫完好無裂痕。
Check hydraulic lifting platform frame structure, you should review the basis and standard bolts fastening bolts required to set double nuts or spring pads, each part of the weld intact without cracks.

2、附著桿件應按照說明書要求的材質、規格設置，不應任意更改，附著桿間距應符合說明說要求，一般為6m一道，液壓升降平臺附著桿的連接方式及緊固方式應按說明書要求執行，不應隨便變更。
Shall be in accordance with the instructions attached to the rod material requirements and specifications set should not be any change, attached to the rod spacing requirements shall comply with instructions say, a general execution of 6m, connections hydraulic lifting platform attached to the rod and fastening requirements shall be specified, should not be changed casually.

3、安全過程中發現，液壓升降平臺http://m.kkwl.net/有用鋼筋代替螺旋，鋼筋兩端分別焊個鋼筋頭代替螺帽的現象，這種做法是非常危險的，所以不能減少成本而且對客戶部負責任。
Security process found useful reinforced hydraulic lifting platform instead of a spiral, the ends were welded reinforced steel head instead of a nut phenomenon, this practice is very dangerous, it can not reduce the cost and responsibility of the client department.