液壓升降平臺http://m.kkwl.net/在啟動發動機時要注意如果沒有異常即停機準備正式啟動，一定要保證泵控制手柄在中位，液壓升降平臺啟動后必須使其運轉一段時間，方可進入工作狀態。嚴格注意觀察有無外泄液壓油，仔細聽有無異常噪聲查看發動機有無重負，各個管路有無沖擊，每個部位的溫度升高是否正常。如果發現異常情況立即停機排查原因，非專業人員不要擅自拆卸否則會造成重大損失。
Hydraulic lifting platform when starting the engine to note that if there is no abnormal shutdown to prepare the official launch, we must ensure that the pump control lever in the neutral position, the hydraulic lifting platform must start it running for some time before they enter the working state. Strictly observe whether the leaked hydraulic oil, carefully listening to any abnormal engine noise to see whether the burden, whether the impact of the various lines,each part of the elevated temperature is normal. If abnormal situation immediately stop the investigation reasons, non-professionals do not disassemble this could cause significant damage.
      
液壓升降平臺http://m.kkwl.net/液壓泵站在搬運的時候注意輕拿輕放，不要使泵的控制手柄和溢流閥與硬物發生碰撞，嚴重撞擊會使控制閥和伺服缸或補油泵以及溢流閥產生外泄漏油現象。液壓升降平臺在裝上并正確連接完畢之后，向泵里注入清潔油也將上方卸油管卸下，見油液流出后擰緊接頭，保證液壓升降平臺空運轉時間使泵內回轉體得到潤滑，否則容易磨損或燒壞回轉元件。
Hydraulic lifting platform pump standing handling when the attention gently, do not make the pump and pressure relief valve control handle with a hard object collision, serious impact would control valves and servo cylinder or produced outside the charge pump and pressure relief valve oil leakage phenomenon. After the hydraulic lifting platform on the installation is complete and correctly connected to the pump will inject clean oil above the unloading tube removed,see the oil outflow after screwing tight fitting, ensure that the hydraulic lift platform idling time for the body to get lubricated rotary pump, otherwise easy to wear or burn rotating components.