固定升降機http://m.kkwl.net/主要是通過動力單元帶動液壓油而產生的動力進行上升的，人們對于固定升降機的需求量在不斷的增加，對于其升降速度的要求也在不斷的增加，不同的型號和工作臺面的不同其升級速度也不同的，下面石家莊悅翔機械制造的有關技術人員給大家介紹一下固定升降機升降速度的影響因素有哪些？

1、對于固定升降機來說，動力單元調節可以影響它的升降的速度，主要是動力單元和油缸控制的，動力單元在生產時設有四個出孔，可以進行調節大小，并且能增大或減小油缸液壓油流量，通過調整馬達速度或電液比例閥來調整液壓油流量。
For fixed lift, the power unit adjusts its movements can affect the speed, the power unit and the main cylinder is controlled, in the production of the power unit is provided with four exit apertures, the size can be adjusted, and can

be increased or decreased cylinder hydraulic oil flow by adjusting the motor speed or electro-hydraulic proportional valve to adjust the oil flow.

2、對于固定升降機油缸的控制，還有油缸的尺寸，在能夠滿足設計的需求的情況下，需要盡量的減少油缸的尺寸，對于油缸尺寸越小，上升速度越快。液壓油管越長，上升時間也就越長。
For a fixed lift cylinder control, as well as the size of the fuel tank, in the design to meet the needs of the case, try to reduce the size of the fuel tank, fuel tank size for a smaller rise faster. The longer hydraulic tubing, the rise time is longer.
 
3、對于固定升降機貨物的載量，如果一次性運送貨物的噸位也會影響升降速度，達到固定升降機運送貨物的最佳值是速度的保障，如果偏重就影響到了速度，如果貨物太輕，也影響到了正常運送時間。使用時間過長的液壓泵，就會導致固定升降機速度變慢。
For fixed-lift cargo load, if one-time delivery of goods tonnage movements also affect the speed, to achieve the best value fixed lift speed the delivery of goods is guaranteed, if the emphasis on the impact of the speed, if the goods are too light, also affected normal delivery time. Hydraulic pump used for too long, it will lead to slower fixed lifts.
 
4、采用固定升降機http://m.kkwl.net/電動機調速裝置調整速度當速度變慢時，應該檢查固定升降機電動機調速裝置的參數設置和硬件是否正常，同時還應該檢查電動機調速裝置的外接控制檢測元件是否正常的。
Fixed lift motor speed control device to adjust the speed when the speed is slow, you should check whether the parameter set a fixed lift motor speed control devices and hardware to normal, but should also check the external motor speed control device to control whether the detection element normal.